The Convair RB-36H


The jet nacelles required careful assembly and a fair bit of epoxy filler.  The fit of the pylon to the nacelle was very loose and required some
sanding on the base of the pylon to get them to set vertically.  Still some filling to sand off here.  Also, the pylons have a strut on one side,
but there are slots to fit the strut on both sides of each pylon, so two of those need to be filled.  Such a pretty sculpture, though.

B-36 Index Page _____ B-36 Index Page _____ My Models Index Page   _____   John Eaton Home Page