Sikorsky CH-37
1/72 Special Hobby  kit

Click on the thumbnail for a full size image

The nacelles are rather beastly to get together.  There are 7 parts that make up the eggs plus the resin wheel well insert, and it all has to be put together at one time to get
the shape right.  There are no alignment pins or guides.  Any need to sand will cause loss of detail especially around the screens.  I tacked it all together with
superglue and moved things around to get the best fit, and then final glued and filled gaps with more superglue.  The resin well inserts take some fitting or they will
not match the opening on the nacelle bottom, and will be too far forward for the landing gear to fit.  The stub wings then were added.  Care is needed in aligning them as well.

CH-37 Index Page           My Models Index Page           John Eaton Home Page