Junkers G38
Revell 1/144 modified to D-2500 configuration
D-2500
had 4 radiators on both wings. There were oil coolers, or
something that looks like them, on each engine, but not the way I have
them here. There
should
be seven on each engine, and the outboard ones should be on the wing.
They are also much shorter than shown here. A later photo shows
them
that
way. .020 styrene rod made the oil coolers, and the radiators are
made from corrugated styrene sheet with a base below. The landing
gear is
interesting
to put in place, 3 parts on each side have to go together all at once
to keep the proper alignment and to get the tandem wheels all to rest
on the ground.