Junkers G38

Revell 1/144 modified to D-2500 configuration

A lot of work is needed to reduce silvering of decals on models with corrugated surfaces.  I applied the ALPS decals without any overcoats prior to
applying them, and used a flood of Micro Sol to settle them.  I also used water and Micro Sol to wet the surfaces before applying the decals.  Once the decals
had settled some I cut away all unnecessary clear film, including the interior of the numbers on the wing registrations.  Finally, I perforated all of the decals
mercilessly with the point of a very new exacto blade and applied more Micro Sol.  I made two complete sets of decals and used almost all of them in the process.
 Last, I touched up a few areas with paint.  Uncoated ALPS decals scratch when you look at them wrong, but they are very thin and flexible.